Other Imported Pressure Sensor - BMP180 <h1>Pressure Sensor - BMP180</h1> Pressure Sensor - BMP180 Breakout Board Measuring the absolute pressure of the enviroment using a digital barometer such as this has some interesting applications. By converting the pressure measured into altitude, you have a reliable sensor for determining the height of your robot, plane or projectile! Using a sensor as capable as the BMP180 you can achieve accurary of 1m, with noise of only 17cm in ultra high resolution noise. The device will operate at only 0.3uA meaning low current draw for battery powered applications. The BMP180 comes fully calibrated and ready to use. As the device operates over I2C we've added optional I2C pull ups that can be enabled using the PU (pull up) jumper on the board for your convenience and ease during breadboarding. Using I2C, the device provides pressure and temperature as 16bit values, which are used along with calibration data within the device are used to provide a temperature compensated altitude calculation. 0 stars, based on 0 reviews 0 5
$4.99

Home / Shop / Arduino / Accessories

Pressure Sensor - BMP180

0 Reviews
$4.99
Pressure Sensor - BMP180
Pressure Sensor - BMP180

Home / Shop / Arduino / Accessories

Pressure Sensor - BMP180

$4.99
Model Number: FZ0004
Maximum quantity exceeded
Minimum purchase amount of 0 items is Required
Maximum purchase amount of 0 is Allowed
4.990
5 Left in Stock
Manufacturer: Other Imported
Facebook
Twitter
Email
Pinterest
Google+
LinkedIn
Digg
Delicious
  • Description
  • Specifications
  • Customer Reviews (0)

Pressure Sensor – BMP180

Pressure Sensor – BMP180 Breakout Board

Measuring the absolute pressure of the enviroment using a digital barometer such as this has some interesting applications. By converting the pressure measured into altitude, you have a reliable sensor for determining the height of your robot, plane or projectile!

Using a sensor as capable as the BMP180 you can achieve accurary of 1m, with noise of only 17cm in ultra high resolution noise. The device will operate at only 0.3uA meaning low current draw for battery powered applications.

The BMP180 comes fully calibrated and ready to use. As the device operates over I2C we’ve added optional I2C pull ups that can be enabled using the PU (pull up) jumper on the board for your convenience and ease during breadboarding.

Using I2C, the device provides pressure and temperature as 16bit values, which are used along with calibration data within the device are used to provide a temperature compensated altitude calculation.

Pressure Sensor – BMP180

Model: BMP180
Full Calibrated Pressure Range: 300hPa to 1100hPa (+9000m to -500m)
Supply Voltage: 1.8V to 3.6V
I2C Interface: Max I2C Speed: 3.5Mhz
Low Pressure Consumption: 0.5uA at 1Hz
Low Noise: Up to 0.02hPa (17cm)
Size: 21mm x 18mm
Quantity: 1

Be the first to write a review.
Submitting Your Review, Please Wait
Review Submitted

Add a review for Pressure Sensor - BMP180

You must include a title, rating, and message in your review.
Your Review Title
Your Rating
Your Review